Deleting A User; Updating A User Profile - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00
GUI System Tab
6. Enter a password.
long, and can not contain and spaces.
7. Select
appears.
8. Select one of the following user permissions:
•
Admin: Allows the user to perform network administrator tasks such as
calibrating, adding, deleting, and updating user profiles.
•
Calibrate: Allows the user read and write privileges and the ability to
perform calibration procedures on the unit.
•
Read/Write: Allows the user to read and update information.
•
Read: Allows the user read-only privileges.
9. Select Update. The new user profile is added and appears on the User List.

Deleting a User

1. From the System tab, select Security.
2. From the User List, select the User Name to be deleted.
3. With the user name highlighted, select Delete. The user is removed from the
User List.

Updating a User Profile

1. From the System tab, select Security.
2. From the User Name list box, select the user profile to be updated. The user
name, password, and permission appears in the Account Information box.
3. Select
•
If Password was selected, a keypad appears, allowing you to modify the
current information. Press Enter when you are done.
•
If Permissions was selected, the Select User Permissions window appears.
Select the updated permissions that you wish to apply.
4. When you are done updating the user's profile, select Update. The updated
information appears on the User List.
777
Important: Password must between 4 and 8 characters
, next to the Permission field. The Select User Permissions window
, next to the field to be updated.