VeEX MPA User Manual page 727

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
Quality of Service
Entry
To view MPLS results, select the MPLS button. The following statistics appear:
MPLS
MPLS Tagged
Frames (per level)
Traffic Class Entry
Results - Strm Rslt (Stream Results) Screen
(Specifically for GFP Mappings)
The Stream Results screen displays statistics for a specified incoming packet stream.
The screen allows you to scroll through the different packet streams and view their
individual results.
The following statistics appear:
Statistic
Selected Stream
Entry
Total Stream
Statistics Table
727
For each stacked VLAN tag level (1-4), separate data rows
for QOS Entries 0-7 are displayed. These reports the number
of frames received for each user priority level value. A total
of 8 different counters appear for each Stacked VLAN level.
Description
Reports the total number of frames received that are
identified as MPLS frames, per tag level.
For each tag level enabled (1-4), a 4-byte MPLS label is
inserted in the Ethernet frame between the Source MAC
Address field and the Length/Type field.
For each stacked MPLS label level (1-4), separate data rows
for TC Entries 0-7 are displayed. These reports the number of
frames received for each user priority level value. A total of 8
different counters appear for each Stacked MPLS level.
Description
Displays the selected Stream ID number and the stream's
MAC Source and MAC Destination addresses, to which the
displayed statistics data belongs.
Provides transmit and receive statistics by Count and %BW,
for the selected Stream ID.
Transmit Statistics (per stream):