VeEX MPA User Manual page 67

MPA_e_manual_D07-00-129P_RevA00
Getting Started
1. Before updating the MPA system, close all open Remote GUI, VNC and/or SCPI
connections to the MPA system.
2. Open a web-browser, and enter the MPA processor's IP Address in the URL
field, and then press Enter to connect.
3. The System Software Update screen appears as soon as you connect to the
MPA system.
4. Click the Choose File button.
5. Browse to the location where the tca.X.Y.ZZ.tgz was saved, and select the .tgz
file.
6. Click the Upload and Update Software button to begin the software upgrade.
7. After pressing the Upload and Update Software button the .tgz file will upload
to the MPA system, which can take several seconds, followed by a System
Software Update screen stating "The software update process has started".
Warning! Do not turn the MPA's Power Off, or connect to the MPA system during
this time period.
8. The web browser can be closed out after the System Software Update screen
is displayed, as the browser will not provide any additional feedback or
functionality during the rest of the software upgrade process.
9. The MPA system will automatically reboot as part of the upgrade process, which
may take between 5 to 15 minutes depending on the unit configuration, after
which you can remotely connect to it again.
10. After waiting the appropriate amount of time, reconnect to the system with the
VCN or the Remote Client GUI and verify the MPA is now configured with the
Feature Set version from the System Tab's
67
1
2
About This Product
3
screen.