VeEX MPA User Manual page 694

MPA_e_manual_D07-00-129P_RevA00
IP Dest
UDP Dest
MAC Src
IP Src
UDP Src
IP TOS
IP TTL
IP FRAG
IP TC
IP HOP
IP FLOW
Send Burst
COL button
Destination IP address
UDP Destination Port
Source MAC address
Source IP address
UDP Source Port
IPv4 - IP Type of Service
IPv4 - IP Time to Live
IPv4 - Select whether to allow or disallow IP fragments
IPv6 - Traffic Class (hexadecimal number)
IPv6 - Hop Limit
IPv6 - Flow Label
The Send Burst button will generate a single burst of packets
on the selected stream id, for the number of packets specified
by the Burst Size setting, when the selected stream is turned
off.
The default Burst size is 1 frame, however you can edit the
stream's Burst Size setting from the stream's Profile window.
Burst sizes can range from 1 to the maximum number of
packets per second.
The COL button allows the user to rearrange the Stream
Profile Table's columns display.
To use the Rearrange Columns feature:
1. Select the Col button, to display the Rearrange
Packet Tab
694