VeEX MPA User Manual page 96

MPA_e_manual_D07-00-129P_RevA00
8 Module Extraction Handle
MPA units shipped since October of 2015 include a revised MCH controller card, which
can support External timing via the Clock port.
The Revised MCH controller card supports the following features:
1 Module Out-Of-Service LED
2 Module Health LED
3 RJ-45 LAN port (10/100/1000 Base-T)
4 RJ-48 Clock In/Out port
5 External Clock In Status LED
6 Slot Status LEDs
7 Micro-B USB 2.0 port
8 Module Hot Swap LED
9 Module Extraction Handle
•
Ethernet communication to the
RJ-45 port (3)
•
The revised MCH controller card also includes an RJ-48 Clock in/out port, a CLK
status LED (5)
•
Refer to Chassis Clock
port
AM4022 processor
for details on configuring and using the external Clock
MCH (MicroTCA Carrier Hub)
is routed through the GBE1
96