MPA_e_manual_D07-00-129P_RevA00
R
RDI-P
For SONET, Remote Defect Indication - Path (G1).
RDI-V
For SONET, Remote Defect Indication - Virtual Tributary (V5).
Remote Error Indication (REI)
An indication returned to a transmitting node (source) that an errored block has been
detected at the receiving node (sink). This indication was formerly known as Far End
Block Error (FEBE).
Remote Error Indication Line (REI-L)
An indication returned to a transmitting node (source) that a B2 error has been detected
at the receiving node (sink) at the line level.
Remote Error Indication Path (REI-P)
An indication returned to a transmitting node (source) that a B3 error has been detected
at the receiving node (sink) at the path level.
Restart
A common function button that clears and resets all error, alarm, and event activity
counters, statistics, and LEDs. It also starts any activity that was stopped using the Stop
button.
RFC 2544
RFC 2544 tests are used as a benchmark test for network devices. They were
developed to test throughput, latency, frame loss and burstability across a range of
packet sizes and bandwidths. RFC 2544 has become the de facto standard for
benchmarking Ethernet networks.
RFI
Remote Failure Indicator.
Ring
•
Refers to the unit's ability to transmit APS functions for a Ring network.
830