VeEX MPA User Manual page 718

MPA_e_manual_D07-00-129P_RevA00
•
Scan - Displays a list of errors and alarms along with their count and duration.
•
ERR - Displays a list of errors along with their count, errored seconds, average
and current rates.
•
ALARM - Displays a list of alarms along with the number of seconds spent in the
alarm condition.
•
Count - Displays Utilization, Packet, VLAN, MPLS and Packet Size count
statistics.
•
Strm Rslt - Displays Stream ID specific statistics.
•
Event - Displays a summary of error alarm activity.
•
Large LEDs
Results - Scan Screen
(Specifically for GFP Mappings)
This function displays a list of received errors and alarms.
For alarms, the duration is reported as a count in seconds.
For errors, an error count is reported.
The message No Errors or Alarms appears if no events are received by the system.
This function provides a quick summary of incoming errors and alarms. It is effective in
identifying a general area to investigate when error or alarm activity is detected.
Results - ERR (Errors) Screen
(Specifically for GFP Mappings)
The Err screen reports error statistics on the incoming signal.
The following statistics appear:
Statistic
Error
- Displays easy to read LEDs of error alarm activity.
Description
Displays the error type recognized and recorded by the unit.
Packet Tab
718