MPA_e_manual_D07-00-129P_RevA00
Getting Started
The GUI does not
look right, spaces
between tabs, etc
The GUI is open but
all of the settings are
disabled
The GUI is open but
only the System tab
and Help tab is
displayed
VNC Connection
Virtual Network Computing (VNC) Connection
As of Feature Set version 8.1.45 (and later), a VNC Server has been added to MPA
systems as another method of remotely controlling the system's Graphical User
Interface (GUI) client software. In addition to the standard multi-user Windows based
Remote GUI client, the VNC Server on an MPA unit can also support simultaneous
VNC Viewer connections, allowing multiple users to remotely control a single MPA
system.
VNC works on a Viewer/Server model. Up to ten (10) VNC Viewers can simultaneously
be connected to the VNC Server running on the MPA, via the MPA's IP Address
followed by a colon and a VNC Port number from 1 to 10, with one user per VNC Port.
Example: 192.168.0.10:1 to 192.168.0.10:10
The maximum number of simultaneous connections is subject to change pending
further evaluation.
41
The Remote Client requires the PC's display setting's
•
DPI to be set to 100%.
•
Right-click on your desktop and select Display
Settings. Then adjust the setting labeled "Change the
size of text, apps and other items" to 100%. This
should resolve the look of the GUI, however you may
also need to adjust your screen resolution to
compensate for the change in font size
•
In order to change any of the settings, you will need to
click the padlock icon on the GUI and select Lock and
Exit. Refer to the
•
Follow the proper Reboot instructions to reboot the
MPA
•
Contact
Customer Technical Support
Lock Icon
for more information