VeEX MPA User Manual page 235

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
The Test screen configures test parameters associated with an OTN protocol
processor.
The Test screen contains the following functions:
•
SET 1
•
Service Disruption
•
RTD
•
SFP Info (MPM-10G only)
OTN Test - Set 1
The SET 1 functions determine how long a protocol processor's test runs and what
activities occur at the end of the test.
The following appears on the SET 1 screen.
Function
Duration
235
Description
This function configures how long a timed test runs. The
following options are available:
•
Continuous - Test is untimed, and unit is always
collecting data.
•
5 Minutes - Test runs for 5 minutes.
•
15 Minutes - Test runs for 15 minutes.
•
1 Hour - Test runs for 1 hour.
•
2 Hours - Test runs for 2 hours.
•
24 Hours - Test runs for 24 hours.
•
72 Hours - Test runs for 72 hours.
•
1 Week - Test runs for 1 week.
•
2 Weeks - Test runs for 2 weeks.
•
User Defined - Allows a specific test duration to be
entered using a touch screen keypad. The minimum
duration is 1 minute. The maximum duration is 99
days, 23 hours, and 59 minutes.