VeEX MPA User Manual page 323

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
Expected Path
Signal Label
323
Enter any eight bits for the Path Signal Label for byte C2
expected.
Configure to receive a specific value for the C2 byte. The
following options are available:
•
00 (Unequipped)
•
01 (Equipped)
•
02 (VT Structured STS)
•
03 (Lock VT Mode)
•
04 (Async DS3 Mapping)
•
12 (Async DS4NA Mapping)
•
13 (ATM Mapping)
•
14 (DQDB Mapping)
•
15 (Async FDDI Mapping)
•
16 (HDLC Over SONET)
•
1A(10G WAN IEEE802.3ae)
•
1B(GFP Mapping)
•
User Defined (any eight bit pattern 0 to FF)
This option is not coupled with the C2 byte option in the
Transmit Overhead screen. If it is changed in this screen, it
will not change the Transmit setting.