VeEX MPA User Manual page 522

MPA_e_manual_D07-00-129P_RevA00
Mode Sets which Ethernet rate to test, and displays the configured
Ethernet mapping rate to test from the MLD, OTN or
SONET/SDH tab's Interface menu.
For the MPM-400G card, the following Ethernet rate is
available:
•
425 Gbps CFP8 RS-FEC opt LAN
For the MPM-100AR card, the following Ethernet rates may
be available, depending on the selected Port:
•
103 Gbps QSFP opt LAN
•
103 Gbps QSFP RS-FEC opt LAN
•
41 Gbps QSFP opt LAN
•
25 Gbps opt LAN
•
25 Gbps RS-FEC opt LAN
•
25 Gbps Seed A/B (appears when 25 Gbps opt LAN
is set)
•
10 Gbps opt LAN
•
10 Gbps Seed A/B (appears when 10 Gbps opt LAN
is set)
For the MPM-100G card, the following Ethernet rates may be
available::
•
103 Gbps CFP4 opt LAN
•
103 Gbps QSFP opt LAN
•
103 Gbps CFP4 RS-FEC opt LAN
•
103 Gbps QSFP RS-FEC opt LAN
•
41 Gbps QSFP opt LAN
For the MPM-10G card, the following Ethernet rates may be
available:
•
10 Gbps opt LAN
•
10 Gbps elec @ FDX
•
10 Gbps Seed A/B (appears when 10 Gbps opt LAN
is set)
Packet Tab
522