VeEX MPA User Manual page 252

MPA_e_manual_D07-00-129P_RevA00
Elapsed The duration in Days:Hours:Minutes:Seconds that the current
Time OTUCn test has been running.
OTUCn test's Elapsed Time.
Stop When the Stop button is selected, the following occurs:
Stop button. If the
pressed for any OTN port (Slice) in the OTUCn group, not just Slice
#1, then this too will stop the test for the entire OTUCn group.
Restart When the Restart button is selected, the following occurs:
being received
•
The LED turns Red when an error or alarm is currently being
received, and reverts to Green when there is no current error
or alarm activity
•
The word Summary remains Green until an error or alarm is
received
•
If Summary turns Red, then it will remain Red until the test is
restarted to indicate history of the received error or alarm
activity
Only the OTUCn group's controlling Slice (Slice #1) displays the
•
The OTUCn group's Elapsed Time counter in the OTUCn
Instances menu stops incrementing
•
The Elapsed Time counter on every OTN port in the OTUCn
group stops incrementing
•
Every OTN port (Slice) in the OTUCn group stop's logging
alarm, error, and event statistics reported by the port's Results
function.
Only the OTUCn group's controlling Slice (Slice #1) displays the
Stop button in the Common Function Button row is
•
The OTUCn group's Elapsed Time counter in the OTUCn
Instances menu resets to 000 Days, 00 Hours, 00 Minutes,
and 00 Seconds, and then begins to increment after the
Restart finishes
•
The Elapsed Time counter on every OTN port in the OTUCn
group resets and begin incrementing
•
The alarm, error, and event statistics reported by each OTN
port (Slice) in the OTUCn group reset to zero, and begins
logging new incoming activity
OTN Tab
252