VeEX MPA User Manual page 316

MPA_e_manual_D07-00-129P_RevA00
TC-UNEQ-V
TC-LOF-V
Receive
SONET Receive Screens and Functions
The receive section allows you to configure the receive settings for the parameters used
in SONET operations.
The following receive functionalities are available through the SONET Receive screen:
•
Set - Set 1
•
Set - Set 2
•
Set - Set 3
•
SOH
•
POH
•
Capture
•
SIG (Signal Status)
SONET Receive - Set / Set 1
Use the Set 1, Set 2 and Set 3 screens to configure the SONET Receive parameters.
Tandem Connection-Unequipped. An all-zeros pattern is
inserted into the Z6 byte of the VT OH.
Only appears when the
configured for "VT Enable".
Tandem Connection-Loss of Frame. Generates a loss of a
valid multiframe pattern to downstream equipment.
Only appears when the
configured for "VT Enable".
TC Overhead Processing
TC Overhead Processing
SONET Tab
is
is
316