VeEX MPA User Manual page 201

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
OTN Receive - Set / Set 1
Use the Set 1, Set 2 and Set 3 screens to configure the OTN Receive parameters.
The following describes the functions that appear on the Set 1 screen.
Functions
Settings Control
Interface
201
Description
If Coupled is selected, settings changed on the Receive
screen will automatically change on the Transmit screen as
well.
If Independent is selected, settings established on the
Receive screen will only affect Receive mode.
Some settings such as Interface are always coupled,
regardless of the Settings Control mode.
Selects the receive Interface Rate.
For the MPM-100AR card, the following OTN interface rates
may be available, depending on the selected Port and the
licensed-based test options currently enabled:
•
OTUCn (112.304G) MLD - Configures the size and
members of an
•
OTU4 QSFP28 (111.809G) MLD - Provides OTU-4
(OTL-4.4) testing via QSFP28
•
OTU3e2 (44.583G) MLD - Provides OTU-3e2 (OTL-
3.4) testing via QSFP+
•
OTU3e1 (44.571G) MLD - Provides OTU-3e1 (OTL-
3.4) testing via QSFP+
•
OTU-3 (43.018G) MLD - Provides OTU-3 (OTL-3.4)
testing via QSFP+
•
OTU2e (11.095G) - Provides 11.095 Gigabit Ethernet
LAN testing over OTU-2 via SFP+
•
OTU1e (11.049G) - Provides 11.049 Gigabit Ethernet
OTUCn group