MPA_e_manual_D07-00-129P_RevA00
6. Select Exit to close the Lock/Unlock dialog box.
When you have the test set locked, the
To unlock a test set that you have locked:
1. Select the icon. The Lock/Unlock dialog box appears.
2. Selecting one of the following causes the command buttons to change to "Lock
and Exit" and "Lock":
•
Unlock and Exit - Unlocks the unit and automatically closes the dialog
box.
•
Unlock - Unlocks the unit without closing the dialog box. Select Exit to
close the Lock/Unlock dialog box.
When the test set is unlocked, the
To lock a test set:
1. Select the icon. The Lock/Unlock dialog box appears.
2. Selecting one of the following causes the command buttons to change to "Unlock
and Exit" and "Unlock", and the information boxes become available.
•
Lock and Exit - Locks the unit and automatically closes the dialog box.
•
Lock - Allows you to enter note information in the Circuit Info: and
Contact Info: boxes before closing the dialog box. The notes carry over to
all protocol processors in the test set. When a different test set is locked
the user can enter notes pertinent to it. Select Exit to close the dialog box.
Adding Notes to a Test Unit
When you
lock
a test unit, you can add notes to the Add/Lock dialog box that are
pertinent to the test set. Different test units can carry their own specific notes.
To add notes to the Lock/Unlock dialog box for a test unit:
Understanding Test Units
icon is displayed.
icon is displayed.
80