Remote Client Application; Remote Client Application Overview - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00

Remote Client Application

Remote Client Application Overview

The Remote Client is a remote GUI (Graphical User Interface) application that allows
you to remotely connect to and control MPA products from a Windows based PC.
Before using the Remote Client:
•
Verify the minimum
•
Verify that the
•
Verify that you have security access to the unit.
•
Install the DLI Remote Client
To start the Remote Control Application:
If using Windows Vista or later, you may need configure Windows to run
the Remote GUI with Administrator permissions, even if you are already logged
in as an Administrator.
To do this Right-click on the DLI Remote Client icon and select Properties.
Then from the Compatibly tab, enable the "Run this program as
Administrator" option, and click OK.
1. Double-click the DLI Remote Client shortcut icon that appears on your PC's
desktop.
2. Enter the remote unit's IP address, and your User ID and Password.
The default User ID is Admin (case sensitive), and the default Password is
Admin1 (case sensitive)
3. Select OK.
•
When attempting to connect to an MPA with the Remote Client
application for the first time, or for the first time after a software update,
the application tends to become unresponsive after the file transfer
process.
•
If this happens, click Cancel or End Task on the Remote Client
application, then reconnect to the MPA a second time.
4. Once the connection is made, the remote unit's GUI appears. The title bar
contains the product name and connection method. Use your mouse to select
functions.
software and hardware
Ethernet parameters have been entered into your test set.
on to your PC.
Remote Client Application
requirements.
34