VeEX MPA User Manual page 304

MPA_e_manual_D07-00-129P_RevA00
#14
#15 (EXTRA)
K2 Full Byte (Ring Mode)
This function configures the bit pattern of the K2 byte using either predefined or user
defined settings by individually setting the eight bits of the K2 byte using the touch
screen keypad.
The following options are available:
Options
Set to 00000000 Configures the K2 byte to 00000000 bit
Default
(10101010)
Illegal
(11111111)
User Defined
K2 Bits 1-4 (Ring Mode)
This function edits the first four bits of the K2 byte. In Ring mode, the first four bits are
the Source Node Identification. (The Source Node ID is set to the Node's own ID.)
The following options are available:
Options
Channel 14 requests switch action, Bit pattern
1110
Extra traffic channel requesting switch, bit
pattern 1111. This is the Transmit Illegal button
setting.
Description
pattern.
Configures the K2 byte to 10101010 bit
pattern.
Configures the K2 byte to 11111111 bit
pattern.
Allows you to configure the bit pattern one
bit at a time using the touch screen keypad.
Description
SONET Tab
304