VeEX MPA User Manual page 49

MPA_e_manual_D07-00-129P_RevA00
Getting Started
Closing the Remote GUI
Just closing the VNC connection to the MPA does not automatically terminate the
Remote GUI application running on the VNC's remote desktop.
Because the Remote GUI runs on a remote desktop, it will continue to run even when
you close the VNC connection used to view the remote desktop, possibly resulting in
valuable resources being needlessly unused which instead could be used by other
users.
When you are ready to close your Remote GUI session to the MPA, you should first
close the Remote GUI application by logging out of the application, and then close the
VNC viewer.
To Logout of the MPA, select the Shut Down button from the bottom right corner of the
GUI, then choose Logout from the shutdown menu.
Shutdown and Reboot
When logged in to the GUI with Admin permissions, then the Shutdown and Reboot
options are always available, even another Remote user has one or more ports
by another user.
The "Are you sure?" prompt for Shutdown and Reboot will contain a note
•
stating this action will affect all ports when one or more ports are locked by
other users, as a reminder that this action will also affect the other users
connected to this unit.
49
•
Logout closes your Remote GUI session without affecting
other users.
•
The Shutdown and Reboot options will also close your
Remote GUI session, before shutting down or rebooting the
MPA's Processor.
You will need to confirm your selection from an "Are you
•
sure?" prompt.
Locked