VeEX MPA User Manual page 628

MPA_e_manual_D07-00-129P_RevA00
How to start the Y.1564 test:
1. From the Conf tab, select the test options under the Automated Test Sequence
section. At least one test must be selected
2. The Config Ramp and Config Burst selections are Y.1564 Configuration tests
3. The Perf selection enables the Y.1564 Performance test
4. Select the Start button in the Automated Test Sequence section. The selected
tests will now start and their real-time status will be displayed next to the
Start/Stop button.
Starting Y.1564 Tests
How to view Y.1564 summary results:
1. Select the Perf Test > Results tab
2. A summary overview of the Configuration and Performance test results for all
services are displayed.
Packet Tab
628