Shutdown Or Reboot The Processor From The Gui - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00
Getting Started
3. Enter the Password required to unlock the screen.
Press
enter the Password.
The Password is masked with asterisks, so it will not be displayed on the screen.
4. Select OK. The Locked Unit dialog box appears in front of the user interface.
This dialog box remains on the screen, preventing access to the user interface,
until the screen is unlocked.
If the unit is locked because critical testing is in progress, select the Unlock
button and enter the User ID and Password again. Select OK.
To unlock the screen:
1. Select the Unlock button from the Locked Unit dialog box. The Unlock Login
dialog box appears.
2. Enter your User ID.
Press
enter the User ID.
3. Enter your Password.
Press
enter the Password.
The Password is masked with asterisks, so it will not be displayed on the screen.
4. Select OK.
The unit will only accept the last User ID and Password entered, or the current
user's login User ID and Password. An error message appears if an invalid ID or
Password in entered.

Shutdown or Reboot the Processor from the GUI

The procedure described below allows the system to write unsaved data to the disk
before you shutdown the test set. This task is performed by selecting the Shut Down
common function button on any Protocol Processor tab.
63
to open an on-screen keyboard, or use a mouse and keyboard to
to open an on-screen keyboard, or use a mouse and keyboard to
to open an on-screen keyboard, or use a mouse and keyboard to