VeEX MPA User Manual page 695

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
695
Columns dialog box.
2. In the Rearrange Columns dialog box, select the
Columns button to display the Select Next Column
dialog box.
3. In the Select Next Column dialog box, select the
button for the associated description to appear as the
first column (from left to right) in table. The Select
Next Column dialog box disappears and your
selection appears in the top row of Column dialog box
display window.
4. Again, in the Rearrange Columns dialog box, select
the Columns button to re-display the Select Next
Column dialog box.
5. In the Select Next Column dialog box, select another
button for the associated description to appear as the
next column (from left to right) in the table. The Select
Next Column dialog box disappears again and this
selection now appears above the previous selection in
the Column dialog box display window. .
6. Repeat Steps 4 and 5 to select the chosen however
many of the remaining entries in the Select Next
Column dialog box you wish to re-order.
7. There are two choices for submitting the selected
column display order: (1) Selecting the Apply button
retains the column display order settings until the next
time the unit's power is cycled; (2) Selecting the Save
button retains the column display order settings
indefinitely.
The Columns settings entered locally on the touch screen
panel and those entered via a remote connection are
completely independent of each other. The remote settings
are saved on the remotely connected PC, while the local
settings are saved in the unit. The Clear button can be used
to clear the entries in the Rearrange Columns dialog box
display window, should you want to rearrange the existing
order in the display window. The Cancel button can be used
to cancel out of the operation without changing the existing
column display order. Clicking on the Apply button when no
items are listed in the display window will set up the default