MPA_e_manual_D07-00-129P_RevA00
GUI System Tab
Restoring Factory Defaults
This function will reconfigure all of the protocol processor's settings back to the original
Factory Defaults, for the selected Protocol Mode.
The options that appear on this screen are determined by your hardware
configuration.
Restoring the Factory Defaults from the System > Misc screen will globally apply
the Protocol mode change to all test modules/ports in the system.
You must have all of the ports locked.
1. Select the System tab and choose Misc.
2. Select the Restore To Factory Defaults button.
3. The following menu options appear:
Restore To Factory
Default SDH
Restore To Factory
Default SONET
4. Select the desired protocol mode. The protocol tabs and settings will updated to
reflect the selected mode, and all of the protocol settings will revert back to their
factory assigned default values.
Saving and Restoring Global Settings Configurations
This function allows you to perform the following actions:
•
Save
all protocol processor Transmit and Receive settings and configurations to
file.
•
Restore
all protocol processor Transmit and Receive settings and configurations
by recalling a previously saved settings file.
To Save the current settings configuration:
759
These options appear if your unit contains one or more
board capable of testing SONET/SDH