VeEX MPA User Manual page 698

Multi-protocol analyzer
Table of Contents

Advertisement

MPA_e_manual_D07-00-129P_RevA00
IP Src address
IP Dest address
IP Mode
Sets the IP address of the source (origination).
For IPv4, the address is entered in decimal notation using a
keypad. There are no restrictions on values entered but the
format must be correct, i.e: (
If three digits are entered in a field, a period will be
automatically added.
If only one or two digits are entered, you must enter a period
manually.
For IPv6, the address is entered in hexadecimal notation using a
keypad. There are no restrictions on value entered but the format
must be correct, i.e: (
0-FFFF
:
:
).
FFFF
0-FFFF
0-FFFF
If four digits are entered in a field, a colon will be automatically
added.
If only less than four digits are entered, you must enter a colon
manually.
Sets the IP address of the destination.
For IPv4, the address is entered in decimal notation using a
keypad. There are no restrictions on values entered but the
format must be correct, i.e: (
If three digits are entered in a field, a period will be
automatically added.
If only one or two digits are entered, you must enter a period
manually.
For IPv6, the address is entered in hexadecimal notation using a
keypad. There are no restrictions on value entered but the format
must be correct, i.e: (
0-FFFF
:
:
).
FFFF
0-FFFF
0-FFFF
If four digits are entered in a field, a colon will be automatically
added.
If only less than four digits are entered, you must enter a colon
manually.
Sets the IP version (IPv4 or IPv6) used for the Stream's
.
.
.
0-255
0-255
0-255
0-255
:
:
:
0-FFFF
0-FFFF
0-FFFF
.
.
.
0-255
0-255
0-255
0-255
:
:
:
0-FFFF
0-FFFF
0-FFFF
Packet Tab
).
:
:
0-FFFF
0-
).
:
:
0-FFFF
0-
698

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents