VeEX MPA User Manual page 635

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
Y1564 Settings
Y1564 Ramp
Y1564 Perf
Y1564 Combined
To save or print test results:
1. Configure and run Packet Stream transmissions, or perform an RFC-2544 or
Y.1564 test.
2. Select the Report common function button located at the bottom of the screen.
The Report Setup dialog box appears.
635
Reports the Y.1564 Settings including the Ramp Steps and
enabled Service Stream settings.
Reports the Y.1564 Configuration Ramp test summary for each
Service Stream tested (Step, CIR%, Frame Loss%, Max Jitter,
Max Latency, Avg-RX%, Status).
Reports the Y.1564 Performance test summary for each Service
Stream tested (Avg-RX%, Loss%, Min/Max/Avg/Curr Jitter,
Min/Max/Avg/Curr Latency, Sequence Error Stats, Loss Error
Stats, Status).
Combines the Y.1564 Settings, Ramp, and Performance reports
into one report.