VeEX MPA User Manual page 70

MPA_e_manual_D07-00-129P_RevA00
Important: When an Unlock/Extraction handle is pulled out to the first stop
position, the blue hot-swap LED will flash on/off in short blinks while the selected
card is deactivating. Wait for the hot-swap LED to turn solid blue before
proceeding.
3. Next, pull out the Unlock/Extraction handle (to the first stop position) on the
MCH, and wait for its hot-swap LED to turn solid blue.
4. If your MPA unit has an SCM-210 card, then pull out the Unlock/Extraction
handle (to the first stop position) on the SCM-210 card.
Important: When an Unlock/Extraction handle is pulled out to the first stop
position, the blue hot-swap LED will flash on/off in short blinks while the selected
card is deactivating. Wait for the hot-swap LED to turn solid blue before
proceeding.
5. After the SCM-210 card's (or AM4022 Processor and MCH cards') hot-swap
LEDs are a solid blue, then pull out the Power Supply's Unlock/Extraction
handle (to the first stop position), and wait for its hot-swap LED to turn solid blue.
This will stop power to the chassis.
Common Tasks
70