VeEX MPA User Manual page 643

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
%BW
WWN Dest
Payload
Length
SEQ_ID
F_CTL
D_ID
OX_ID
WWN Src
S_ID
RX_ID
R_CTL
Config - Traffic Stream Profile
(Specifically for Fibre Channel SAN testing on the Packet tab)
A frame stream's profile defines the size, content, and several addresses, and other
parameters for the frame.
The Traffic Stream Profile dialog box is used to set the stream profile parameters. To
access this dialog box, select stream #1 in the Stream Profile Table.
The Fibre Channel Class of Service is set to 3 by default.
Parameter
WWN SRC
ADDRESS
643
Percentage of bandwidth selected on that stream
Destination World Wide Name address
Payload Pattern selected
Frame Length
Sequence Identifier selected
Frame Control address
Destination Identifier address
Originator Exchange ID address
Source World Wide Name address
Source Identifier address
Responder Exchange Identifier address
Routing Control address
Description
Sets the World Wide Name Source Address.
Important: This value must be set before a Fabric & Name
Server login is attempted