VeEX MPA User Manual page 462

MPA_e_manual_D07-00-129P_RevA00
Indication Signal)
APS-L (Automatic Protection
Switching)
OOF (Out of Frame)
MS-RDI (Multiplex Section Remote
Defect Indicator)
RS-TIM (Regenerator Section Trace
Identifier Mismatch for J0 byte)
Pattern Sync
HP-PLM (Higher-Order Path
Payload Label Mismatch)
Concat (Concatenated)
AU-AIS (Administrative Unit Alarm
Indication Signal)
AU-LOP (Administrative Unit Loss
of Pointer)
HP-UNEQ (Higher-Order Path
Unequipped Payload)
The LP/TU Errors and Alarms only appears when a LP mapping is selected.
The TCM Errors and Alarms only appears when
Enabled in the Receive settings.
SDH Results - PTR
Defect Indicator)
LP-RFI (Lower-Order Path Remote
Failure Indicator)
LP-TIM (Lower-Order Path Trace
Identifier Mismatch for J2 byte)
LP-PLM (Lower-Order Path Payload
Label Mismatch)
HP/LP-TC-RDI (Tandem
Connection-Remote Defect Indicator)
HP/LP-TC-ODI (Tandem
Connection-Outgoing Defect
Indicator)
HP/LP-TC-AIS (Tandem
Connection-Alarm Indication Signal)
HP/LP-TC-UNEQ (Tandem
Connection-Unequipped)
HP/LP-TC-LOF (Tandem
Connection-Trace Identifier
Mismatch)
HP/LP-TC-TIM (Tandem
Connection-Trace Identifier
Mismatch)
TC Error/Alarm Processing
SDH Tab
is
462