VeEX MPA User Manual page 726

MPA_e_manual_D07-00-129P_RevA00
Received Multicast
Packets
Received Unicast
Packets
Received Jumbo
Packets
Received Super
Jumbo Packets
Pause Packets
Received
Pause Quantas
Taken
Pause End
Packets
To view VLAN results, select the VLAN button. The following statistics appear:
VLAN
VLAN Tagged
Frames (per level)
Reports the total number of Multicast packets received.
Reports the total number of Unicast packets
Reports the total number of Jumbo packets received. Jumbo
packets are those from 1519 – 9000 bytes in size.
Reports the total number of Super Jumbo packets received.
Super Jumbo packets are those greater than 9000 bytes in
size.
Reports the total number of Pause frames received.
Important: Flow Control must be enabled in order to count
Pause Packets.
Reports the total number of quantas received.
A quanta is a 512-bit timing increment used by a Pause
frame. The number of quanta (N x 512-bits) indicate the
duration of the pause.
Important: Flow Control must be enabled in order to count
Pause Packets.
Reports the number of times that a Pause condition ended
allowing data transmission to resume.
The pause condition ends when the Pause frame's time
parameter is set to 0.
Important: Flow Control must be enabled in order to count
Pause Packets.
Description
Reports the total number of frames received that are
identified as VLAN frames, per tag level.
For each tag level enabled (1-4), a 4-byte VLAN tag is
inserted in the Ethernet frame between the Source MAC
Address field and the Length/Type field.
Packet Tab
received.
726