For The 110V/220V Ac Power Supply - VeEX MPA User Manual

MPA_e_manual_D07-00-129P_RevA00

For the 110v/220v AC Power Supply:

1. Turn AC Power Supply's stand-by switch to the Off position prior to inserting or
unplugging the AC power cord.
a. Refer to
before switching off the power supply or unplugging the AC power cord.
2. Use proper Power Cord: To avoid fire hazard, only use the power cord specified
for this instrument.
a. The AC Power Supply supports a standard IEC 320-C14 connector, as
well as a Self-Locking connector to prevent the power cord from
accidentally being unplugged.
b. The entire cord set must be certified for use in the country of installation.
For use in North America, use a power cord (maximum six-foot length)
with a type SJT, 18 AWG, two conductor with ground, IEC 320-C14 connector
on one end and a NEMA 5-15 connector on the other end.
For Europe and other countries outside of North America, use an
HO5VV-F power cord with a 1-mm2, two-conductor plus ground, IEC 320-
MPA Shutdown Procedure
MPA Power Connections
for the proper shutdown method
88