VeEX MPA User Manual page 236

MPA_e_manual_D07-00-129P_RevA00
Action After
Duration
After configuring the Duration, you must select Restart in
order for the Timed Test to begin.
Action after Duration defines what activities occur at the
conclusion of a timed test. It allows several different options,
including printing results to a printer or recording them to a
file; repeating a test or just processing one test. Test results
appear in a columned report format; however, there is one
option available to record the statistics using a delimiter.
The table below describes the Action after Duration options.
Action after Duration
Options
None
Print Current Statistics
Record Current Statistics
Record Current Statistics
using a delimiter
Description
No action occurs at the end
of the test duration.
At the end of a timed test a
statistics report of the
received Errors, Alarms,
Pointer Analysis, and Signal
Status are printed to the
configured printer.
The test does not repeat.
At the end of a timed test a
statistics report of the
received Errors, Alarms,
Pointer Analysis, and Signal
Status are saved to a text file
with a .stat file extension.
The test does not repeat.
At the end of a timed test a
statistics report of the
received Errors, Alarms,
Pointer Analysis, and Signal
Status are saved to a comma
separated value file with a
.stat file extension.
The results appear in a
OTN Tab
236