VeEX MPA User Manual page 249

MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
Slot #3 OTUC1 #3
Slot #4 OTUC1 #4
Slot #5 OTUC1 #5
Slot #6 OTUC1 #6
For OTUCn configuration settings, see
For OTUCn example groups, see
OTUCn Config - Screen and Functions
To configure the MPA for
OTN tab that is licensed for the OTUCn test option, and choose the OTUCn QSFP28
(112.304G x n) MLD test option.
The OTUCn Instances menu appears. This menu lists all OTN ports in the MPA
chassis that are licensed for the OTUCn test option, allowing you to configure one or
more OTUCn groups.
Each OTN port assigned on an OTUCn group is referred to as a "Slice", where Slice
#1 is always the controlling slice for that OTUCn group.
249
OTUC6 #1 OTUC2 #2
Slice 3 Slice 1
OTUC6 #1 OTUC2 #2
Slice 4 Slice 2
OTUC6 #1 OTUC2 #3
Slice 5 Slice 1
OTUC6 #1 OTUC2 #3
Slice 6 Slice 2
OTUCn Config - Screen and Functions
OTUCn Examples
OTUCn testing, select the Interface menu from any available
OTUC3 #1 OTUC4 #1
Slice 3 Slice 3
OTUC3 #2 OTUC4 #1
Slice 1 Slice 4
OTUC3 #2 OTUC2 #1
Slice 2 Slice 1
OTUC3 #2 OTUC2 #1
Slice 3 Slice 2