MPA_e_manual_D07-00-129P_RevA00
Protocol Tabs
The top section will show the selected Error/Alarm statistics for the selected virtual lane.
When monitoring Error statistics, the following information is display:
•
Lane # selected
•
Name of Error type selected
•
Error count using an 11-digit format
•
Average error rate using an N.NNe-N format
•
Current error rate using an N.NNe-N format
When monitoring Alarm statistics, the following information is display:
•
Lane # selected
•
Name of Alarm type selected
•
Duration of the Alarm in seconds
In the Multi Lane table the following results may or may not be displayed, depending
on the errors/alarms supported by the configure Interface:
AIS
141
Indicates if any Alarm Indication Signal