VeEX MPA User Manual page 534

MPA_e_manual_D07-00-129P_RevA00
Count Statistics
Table
Traffic Stream Profile Configuration
(Specifically for LAN/WAN Ethernet testing on the Packet tab)
column display order: (1) Selecting the Apply button
retains the column display order settings until the next
time the unit's power is cycled; (2) Selecting the Save
button retains the column display order settings
indefinitely.
The Columns settings entered locally on the touch screen
panel and those entered via a remote connection are
completely independent of each other. The remote settings
are saved on the remotely connected PC, while the local
settings are saved in the unit. The Clear button can be used
to clear the entries in the Rearrange Columns dialog box
display window, should you want to rearrange the existing
order in the display window. The Cancel button can be used
to cancel out of the operation without changing the existing
column display order. Clicking on the Apply button when no
items are listed in the display window will set up the default
columns display order.
The Count Statistics Table displays the following information
for both transmitted (TX) and received (RX) packets:
•
TX/RX - Defines which row of statistics is designated
for Transmit counts (TX) and which row is designated
for Receive counts (RX)
•
Packets - Displays the total number of packets sent
and received since the test was started
•
Pkts/sec - Displays the current rate of packets sent
and received in packets per second
•
Bytes - Displays the total number of bytes sent and
received since the test was started
•
Mbit/sec - Displays the current rate of packets sent
and received in Megabits per second
•
%BW - Displays the current percentage of bandwidth
of packets sent and received
Packet Tab
534