VeEX MPA User Manual page 440

MPA_e_manual_D07-00-129P_RevA00
AU-<#> Dropped
TUG-3 Dropped
TUG-2 Dropped
TU-<#> Dropped
Selects a specific AU# signal to monitor in the SDH signal.
The test set receives the SDH signal that is demuxed into
dropped signals and then processed.
The options that appear will depend on your current
configuration. The default setting is 1.
Selects a specific AU# signal to monitor in the SDH signal,
where # is the size of the Mapping.
When available, select the AU-<#> Dropped button to enter
the number of the specific AU channel number to be
demuxed and then processed.
For example, this setting selects which of the four AU-4-
64c channels in an STM-256 signal to be monitored.
The options that appear will depend on your current
Interface and Mapping configuration. The default setting is 1.
When All Path mapping is selected, this setting is
renamed to Container Dropped. In this mode, all AU-n
channels are analyzed for Errors and Alarms from the
Results > All Path screen, regardless of the selected
Container number.
Selects the foreground TUG-3 to be dropped.
TUG-3 will only display for LP mappings, if the AU type is
set as AU-4.
Selects the foreground TUG-2 to be dropped.
TUG-2 is only available for LP mappings C-12 and C-11.
Selects the foreground Tributary Unit to be dropped.
This setting is only available for LP mappings.
SDH Tab
440