VeEX MPA User Manual page 554

MPA_e_manual_D07-00-129P_RevA00
Important: The BW Ceiling and BW Floor settings do not apply to the Back-to-Back
Burst test.
The following list of tasks demonstrate how to configure and test each of the RFC-
2544 benchmark tests.
•
To Configure the RFC-2544 test settings see
•
To run an RFC-2544 Thru Put test see
•
To run an RFC-2544 Frame Loss test see
•
To run an RFC-2544 B2B Burst test see
RFC Tests - Graph
On completion of the RFC 2544 testing, the Throughput and Frame Loss test results
can be graphically displayed.
1. Select RFC Tests
2. Select GRAPH side tab
3. Select Goto Throughput Graph to view the Throughput Results, for your
selected frame sizes measured against the RFC standardizations table for frame
length and frames per second criteria.
(when a test is running).
What are RFC 2544 Tests?
Throughput Testing
Frame Loss Testing
Back-to-Back Burst Testing
Packet Tab
554