S3C6400X RISC MICROPROCESSOR
DAC BOARD CONFIGURE GUIDE
I
out
DAC
It is the current drive DAC in S3C6400. Output current is 6.6mA. So, it has to load 150[ohm] resistor. And it is
recommended to use AMP equipment. Because it prevents electrical damage by ESD.
6.6[mA]
Zm
X2
Z
= 150[ohm]
S
Figure 17-13. DAC Board Guide
Preliminary product information describe products that are in development,
for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.
Zo = 75
TV ENCODER
Z
=75[ohm]
L
17-15