Samsung S3C6400X User Manual page 315

Table of Contents

Advertisement

S3C6400 RISC MICROPROCESSOR
Software single request register, DMACSoftSReq
The DMACSoftSReq read/write register allows DMA single requests to be generated by software. A DMA request
can be generated for each source by writing a 1 to the corresponding register bit. A register bit is cleared when the
transaction is complete. Writing to this register has no effect.
Reading the register indicates which sources are requesting single DMA transfers. A request can be generated from
either a peripheral or the software request register.
Table 11-11 shows the bit assignment of the DMACSoftSReq register.
DMACSoftSReq
SoftSReq
Note: It is recommended that software and hardware peripheral requests are not used at the same time.
Software last burst request register, DMACSoftLBReq
The DMACSoftLBReq read/write register allows DMA last burst requests to be generated by software. A DMA
request can be generated for each source by writing a 1 to the corresponding register bit. A register bit is cleared
when the transaction is complete. Writing 0 to this register has no effect.
Reading the register indicates which sources are requesting last burst DMA transfers. A request can be
generated from either a peripheral or the software request register.
Table 11-12 shows the bit assignment of the DMACSoftLBReq register.
DMACSoftLBReq
SoftLBReq
Software last single request register, DMACSoftLSReq
The DMACSoftLSReq read/write register allows DMA last single requests to be generated by software. A DMA
request can be generated for each source by writing a 1 to the corresponding register bit. A register bit is cleared
when the transaction is complete. Writing 0 to this register has no effect.
Reading the register indicates which sources are requesting last single DMA transfers. A request can be generated
from either a peripheral or the software request register.
Table 11-13 shows the bit assignment of the DMACSoftLSReq register.
DMACSoftLSReq
SoftLSReq
Table 11-11. Bit Assignment of DMACSoftSReq register
Bits
Type
[15:0]
R/W
Table 11-12. Bit Assignment of DMACSoftLBReq register
Bits
Type
[15:0]
R/W
Table 11-13. Bit Assignment of DMACSoftLSReq register
Bits
Type
[15:0]
R/W
Preliminary product information describe products that are in development,
for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.
Function
Software single request
Function
Software last burst request
Function
Software last single request
DMA
11-19

Advertisement

Table of Contents
loading

Table of Contents