NAND FLASH CONTROLLER
NAND FLASH MEMORY CONFIGURATION
Figure 8-6 A 8-bit NAND Flash Memory Interface Block Diagram
Note: NAND CONTROLLER can support to control two nand flash memories .
Xm0CSn[2]
Xm0CSn[3]
If you want NAND BOOT, Xm0CSn[2] must be used to boot.
Preliminary product information describe products that are in development,
for which full characterization data and associated errata are not yet available.
8-12
Specifications and information herein are subject to change without notice.
NAND BOOT
NAND CONTROLLER CS0
NAND CONTROLLER CS1
S3C6400X RISC MICROPROCESSOR
Other BOOT
Configurable
Configurable