Table of Contents
Advertisement
S3C6400X RISC MICROPROCESSOR
ERROR BLOCK ADDRESS REGISTER
Register
ERR_BLK_ADDR0
ERR_BLK_ADDR1
ERR_BLK_ADDRn
Reserved
FAIL_BLK_ADDR
FLASH VERSION ID REGISTER
Register
FLASH_VER_ID0
FLASH_VER_ID1
FLASH_VER_IDn
Reserved
FLASH_VER
Address
R/W
0x701001E0
R
Bank0 Error Block Address Register
0x701801E0
Bit
[31:12]
[11:0]
After a program, load or erase error interrupt, this register will
hold the block address of the failing operation. Read-Only.
Address
R/W
0x701001F0
R
Bank0 Flash Version ID Register
0x701801F0
Bit
[31:16]
[15:0]
The value programmed will depend on the actual memory
device being used. The register is set by the flash controller
after reset. Read-Only.
Preliminary product information describe products that are in development,
for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.
Description
Description
Description
Description
ONENAND CONTROLLER
Reset Value
0x0000
Initial State
0
0
Reset Value
Memory
dependent
Initial State
7-31
Advertisement
Table of Contents
