Table of Contents
Advertisement
FIMV-MFC V1.0
Process ID - RunIndex
Each process is created with specific ID-named as
based on the order of creation. After creating processes at initialization step, a host processor commands the BIT
processor to execute process specified with the RunIndex.
If processes are created sequentially as (a) MPEG-4 encoding, (b) H.264 encoding, (c) H.263P3 decoding for
bitstream A, (d) VC-1 decoding for bitstream B, the assigned ID will be as following.
(a) MPEG-4 encoding : RunIndex = 0
-
(b) H.264 encoding : RunIndex = 1
-
(c) H.263P3 decoding for bitstream A : RunIndex = 2
-
Figure 21.5 Codec firmware state diagram
RunIndex
Preliminary product information describe products that are in development,
for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.
MULTI-FORMAT
- range from 0 to 7. Basically, the ID is assigned
CODEC
VIDEO
21-9
Advertisement
Table of Contents
