Table of Contents
Advertisement
FIMV-MFC V1.0
Features
FIMV-MFC V1.0 is a multi-standard video codec IP that can handle the H.263P3, MPEG-4 SP, H.264 BP and
VC-1 MP in single codec hardware. The FIMV-MFC V1.0 includes the following features.
Multi-standard video codec
MPEG-4 part-II simple profile encoding/decoding
-
H.264/AVC baseline profile encoding/decoding
-
H.263 P3 encoding/decoding
-
VC-1(WMV9) main profile decoding
-
Multi-party call is supported
-
Ex. Simultaneous 1 stream encoding and 3 streams decoding are possible.
Multi-format is supported
-
Ex. The video IP encodes the MPEG-4 bitstream, and decodes H.264 bitstream simultaneously.
Coding tools
[-16,+16] 1/2 and 1/4-pel accuracy motion estimation
-
All variable block sizes are supported.
-
* In case of encoding, 8x4, 4x8, and 4x4 block sizes are not supported.
Unrestricted motion vector
-
MPEG-4 AC/DC prediction
-
H.264/AVC intra-prediction
-
H.263 Annex I, J, K(RS=0 and ASO=0), and T are supported
-
* In case of encoding, the Annex I and K (RS=1 or ASO=1) are not supported.
Error resilience tools
-
MPEG-4 resync. marker & data-partitioning with RVLC
* Fixed number of bits/macroblocks between macroblocks
H.264/AVC FMO & ASO
Bit-rate control (CBR & VBR)
-
CIR(Cyclic Intra Refresh)/AIR(Adaptive Intra Refresh)
-
Pre/post rotation/mirroring
8 rotation/mirroring modes for incoming image at encoder
-
8 rotation/mirroring modes for output image at decoder
-
Programmability
Preliminary product information describe products that are in development,
for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.
MULTI-FORMAT
VIDEO
CODEC
21-3
Advertisement
Table of Contents
