Table of Contents
Advertisement
HOST INTERFACE
Host Interface Data Low Register (hDATAL)
BSEL[3:0] = 1000, MP_A[1:0] = 00, R/W, Reset value = (undefined)
Field
DATAL
Host Interface Data High Register (hDATAH)
BSEL[3:0] = 1000, MP_A[1:0] = 01, R/W, Reset value = (undefined)
Field
DATAH
System Control Register (SYS_CTRL)
BSEL[3:0] = 1011, MP_A[1:0] = 00, R/W, Reset value = 0x0000
Field
Reserved
BOOTDONE
Bank Selection Register (BSEL)
MP_A[1:0] = 11, R/W, Reset value = 0x0000
Field
Reserved
BSEL
24-20
Preliminary product information describe products that are in development,
for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.
Bit
[15:0]
Data Register
Bit
[15:0]
Data Register
Bit
[15:1]
Data Register
[0]
Boot Done for Modem Booting.
When this bit is set to High, boot done signal is asserted to
System Controller. S3C6400(AP) boot operation starts.
Host (Modem) must clear this bit to Low after Modem boot.
Bit
[15:4]
Bank selection
[3:0]
0000 = One of the protocol registers in Bank0 will be selected.
0001 = One of the protocol registers in Bank1 will be selected.
...
1111 = One of the protocol registers in Bank15 will be selected.
S3C6400X
Description
Description
Description
Description
RISC MICROPROCESSOR
Initial State
-
Initial State
-
Initial State
0
0
Initial State
0x000
0000
Advertisement
Table of Contents
