Table of Contents
Advertisement
OmniAccess AP60/61: Installation Guide
802.11g provides a high data rate and is backwards compatible with
802.11b.
802.11g operation uses ODFM and a shared collision domain (CSMA/CA). It
operates in the 2.4GHz Industrial/Scientific/Medical (ISM) band. The ISM band is
available worldwide for unlicensed use. Data is transmitted at speeds of up to
54 Mbps.
Power Over Ethernet
The OmniAccess AP60/61 supports the IEEE 802.3af standard for Power Over
Ethernet (POE). With this feature, the OmniAccess AP60/61 can accept
electrical power from a compatible POE-capable device (such as the
OmniAccess 6000 (with Line Card OAW-LC-2G24FP), OmniAccess 4324,
OmniAccess 4304, or OmniAccess 4308) directly over the FE cable. POE
eliminates the need to provide separate power outlets in environments that are
difficult or undesirable to wire for electricity.
The OmniAccess AP60/61 also supports "inline" and "midspan" POE devices
for normal operation. Inline power is POE that is integrated into FE ports and
provides POE directly to devices. Non-POE ports can have POE added by
means of a mid-span device that provides POE. The non-POE port is connected
to a mid-span POE port, and this mid-span port is connected to the device that
requires POE.
Disposal of AP60/61
When the useful life of the Access Point has expired, be sure to dispose of the
unit in accordance with all local code and environmental regulations. Contact
your local waste management or environmental agencies for details.
Physical Description
Package Contents
The OmniAccess AP60/61 package includes:
One OmniAccess AP60/61 Wireless Access Point
Assorted documentation
Inform your supplier if there are any incorrect, missing or damaged parts. If
possible, retain the carton, including the original packing materials. Use them
to repack the product in case there is a need to return it.
48
Part 031643-00 Rev. 01
June 2005
Advertisement
Table of Contents
