Interfaces - Configure Hdlc Encapsulation On A Channelized Serial Interface - Alcatel-Lucent OmniAccess 700 User Manual

Left running head:
Chapter name (automatic)
Configure
C C
ONFIGURE HANNELIZED
This page enables you to set encapsulation on a channelized Serial Interface
formed by the channel group configuration on a T1E1 controller.
Follow the procedure below to configure Serial interface.
Step 1: In the Interfaces page, click Configure icon for the Serial interface
whose parameters are to be configured. This displays the Configuration Serial
page in the Center Panel.
Step 2: Associate a VRF to the interface. Select the VRF to be associated from
the VRF list. The selected VRF is displayed in the VRF Forwarding field.
Note: By default, all the interfaces are associated with the Default VRF.
Step 3: You need to set the encapsulation type on the interface by selecting the
required option under Encapsulation: HDLC/PPP/Frame Relay/MLPPP/MLFR.
By default, HDLC radio button is selected.
HDLC E
NCAPSULATION
High-level Data Link Control (HDLC) - Layer 2 of the OSI model is the data link
layer. One of the most common layer 2 protocols is the High-level Data Link
Control (HDLC) protocol. In fact, many other layer 2 protocols are based on
HDLC, particularly its framing structure.
1. By default HDLC radio button is selected. (HDLC is the default encapsulation on
the interface), and the following page displays the HDLC parameters:
Figure 16: Interfaces - Configure HDLC Encapsulation on a Channelized
Serial Interface
32
Beta
S I
ERIAL NTERFACE
Alcatel-Lucent
Web GUI Users Guide
Beta