Interfaces - T1 Controller - Channel Group Configuring - Alcatel-Lucent OmniAccess 700 User Manual

Left running head:
Chapter name (automatic)
Configure
Step 4: Configure channel groups on the controller. This creates a channel-group
that will form a Channelized Serial Interface. Click Configure Channel Group to
configure channel group. Channel Group Configuring pop up window is
displayed.
Figure 13: Interfaces - T1 Controller - Channel Group Configuring
•
Enter the channel number in the Channel Number field.
•
Enter the range of the time slots that can be associated with the T1 controller in
the Time Slot field. (Time slot can also be provided in 'a-b' format. E.g, 1-2)
•
Select the speed from the Speed drop down list. Default speed is 64 kbps.
•
Click OK. The channel group thus configured is displayed under the Channel
Group Configuration table. Repeat this procedure to configure more channel
groups.
Step 5: Click Apply to save the T1 Controller configuration or click Close to
return to the Interfaces page.
Step 6: The channel-group thus configured forms the channelized serial
interface, and is displayed in the Interfaces page.
Note: You can configure encapsulation on a channelized serial interface. See
Channelized Serial Interface"
28
Beta
for more details on this.
Alcatel-Lucent
"Configure
Web GUI Users Guide
Beta