Left running head:
Chapter name (automatic)
Configure
Figure 12: Interfaces - Configuring T1 Controller
Step 2: Specify the cable length parameters in the Cable Length box. The cable
length can be of the type Short or Long.
•
Select the Long radio button, and select the pulse value from the Pulse drop-
down list.
Long option configures the transmit and receive levels for a cable length (line
build-out) longer than 660 ft for a T1 trunk. The default length of the cable for
a T1 is Long 0db.
•
Select the Short radio button, and select the length from the Length drop-down
list.
Short option sets the transmit attenuation for a cable length (line build-out) of
660 feet or shorter for a T1 trunk.
26
Beta
Alcatel-Lucent
Web GUI Users Guide
Beta