Installing The Router; Installation Flow; Installing A Cable Management Bracket - H3C SR6600-X Series Manual

2

Installing the router

Installation flow

Figure2-1 Installation flow
Install a cable management
bracket (only on the SR6616-X)
Install the router in a 19-inch rack
Ground the router
Install a power module
Install an MPU and a switching
fabric module
Install an LPU
Install an interface module
Install a CF card
Install optional components
Connect the power cord

Installing a cable management bracket

The cable management brackets of the SR6604-X and SR6608-X are provided with mounting
brackets.
You need to install a cable management bracket for an SR6616-X router.
To install a cable management bracket:
1. Face the front of the router.
2. Align the screw holes on the cable management bracket with the screw holes on the front panel
of chassis, and fasten the screws.
Start
End
9