802.1X commands
This feature is supported only on the following ports:
•
Layer 2 Ethernet ports on Ethernet switching modules.
•
Fixed Layer 2 Ethernet ports of the following routers:
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-LM-HK/810-W-LM-HK/810-10-PoE/81
0-LMS/810-LUS.
MSR2600-10-X1.
MSR3600-28/3600-51.
MSR3600-28-SI/3600-51-SI.
Commands and descriptions for centralized devices apply to the following routers:
•
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK/810-L
MS/810-LUS.
•
MSR2600-10-X1.
•
MSR 2630.
•
MSR3600-28/3600-51.
•
MSR3600-28-SI/3600-51-SI.
•
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC.
•
MSR 3610/3620/3620-DP/3640/3660.
Commands and descriptions for distributed devices apply to the following routers:
•
MSR5620.
•
MSR 5660.
•
MSR 5680.
WLAN is not supported on the following routers:
•
MSR810-LMS/810-LUS.
•
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC.
•
MSR3600-28-SI/3600-51-SI.
•
MSR5620/5660/5680.
The term "AP" in this document refers to MSR routers that support WLAN.
display dot1x
Use display dot1x to display information about 802.1X.
Syntax
Wireless devices:
display dot1x [ sessions | statistics ] [ ap ap-name [ radio radio-id ] | interface interface-type
interface-number ]
Wired devices:
display dot1x [ sessions | statistics ] [ interface interface-type interface-number ]
Views
Any view
154