X Configuration Commands; Display Dot1X; Chapter 1 802.1X Configuration Commands - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – 802.1x - MAC Authentication

H3C S7500E Series Ethernet Switches

1.1 802.1x Configuration Commands

display dot1x [ sessions | statistics ] [ interface interface-list ]

sessions: Displays 802.1x session information.

statistics: Displays 802.1x statistics.

interface interface-list: Specifies an Ethernet port list, which can contain multiple

Ethernet ports. The interface-list argument is in the format of interface-list =

{ interface-type interface-number [ to interface-type interface-number ] } & <1-10>,

where interface-type represents the port type, interface-number represents the port

number, and & <1-10> means that you can provide up to 10 port indexes/port index lists

for this argument. The start port number must be smaller than the end number and the

two ports must of the same type.

Use the display dot1x command to display information about 802.1x, including

session information, statistics, or configuration.

With both the sessions keyword and the statistics keyword not provided, this

command displays 802.1x configuration information.

Related commands: reset dot1x statistics, dot1x, dot1x retry, dot1x max-user,

dot1x port-control, dot1x port-method, dot1x timer.

# Display 802.1x configuration information.

<Sysname> display dot1x

Equipment 802.1X protocol is enabled

CHAP authentication is enabled

Proxy trap checker is disabled

Proxy logoff checker is disabled

EAD quick deploy is enabled

Chapter 1 802.1x Configuration Commands

Table of Contents