802.1X Configuration Commands; Display Dot1X - H3C s3600 series Command Manual

1

802.1x Configuration Commands

The online user handshaking configuration is added. See
The configuration of 802.1x re-authentication is added. See
The configuration of the 802.1x re-authentication interval is added. See
The configuration of quick EAD deployment is added. See
Commands.

802.1x Configuration Commands

display dot1x

Syntax
display dot1x [ sessions | statistics ] [ interface interface-list ]
View
Any view
Parameters
sessions: Displays the information about 802.1x sessions.
statistics: Displays the statistics on 802.1x.
interface: Display the 802.1x-related information about a specified port.
interface-list: Ethernet port list, in the form of interface-list= { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, in which interface-type specifies the type of an Ethernet
port and interface-number is the number of the port. The string "&<1-10>" means that up to 10 port lists
can be provided.
Description
Use the display dot1x command to display 802.1x-related information, such as configuration
information, operation information (session information), and statistics.
When the interface-list argument is not provided, this command displays 802.1x-related information
about all the ports.
The output information can be used to verify 802.1 x-related configurations and to troubleshoot.
Related commands: reset dot1x statistics, dot1x, dot1x retry, dot1x max-user, dot1x port-control,
dot1x port-method, dot1x timer.
dot1x handshake
dot1x
Quick EAD Deployment Configuration
1-1
for related information.
re-authenticate.
dot1x timer reauth-period.